In the late 1800’s, chocolate makers already used molds made from metal. This made it possible to shape them either as flat or three dimensional. Plastic soon replaced that as these were expensive to produce making it possible for amateur chocolatiers to make these at home.
When you buy chocolate molds from the craft store, make sure that this is made from strong plastic that has intricate designs so the finished product will come out beautifully after it comes out of the freezer.
Remember that this must never be washed using soap as this can mare the taste of the chocolate. You should simply use hot water and then dry it thoroughly using a dry cloth.
Each time you use the plastic mold, make sure to wipe it clean. Greasing, spraying or dusting is not needed as this will ruin the appearance of the finished candy.
But there is an exception to that rule.
If you will be mixing your chocolate with some marshmallows, candy sprinkles, jellies or cooked candies, then you must first grease or spray the chocolate mold with oiling spray. This will make the chocolate easy to remove from the mold and if you are going to make another batch, the good news is that you only have to oil spray it once.
Next thing you need to learn is how to properly put chocolate filling into the plastic sheet. For that, you use a regular teaspoon and fill each cavity with chocolate. Some of the chocolate might spill out but don’t worry because you can clean that up later on.
There may be some air bubbles trapped within the chocolate.
To release it, tap the filled mold on the counter to settle the chocolate. Another way is to hold the mold horizontally then gently drop it on the counter. You will probably have to do this several times until there all the air bubbles have been removed.
When the chocolate is ready, this is the time that you put this in the freezer. This is because it is the coolest place in the house taking it less time for the chocolate to harden so you can reuse the mold if you are making another batch of chocolates.
You will know when the chocolates are ready by looking at the back side of the mold. If the cavity appears to be graying, this means that the second you turn this over, the chocolate will easily fall off to the tray.
If it doesn’t fall off on its own, you can tap it firmly. If this does not work, perhaps it needs a little more cooling time in the freezer so put it back in for a few minutes and then try again.
If you happen to have some leftovers from filling the mold, don’t throw it away because you can use it again in the future. Just wait for the chocolate to harden so you can scrape it off and then wrap it in waxed paper.
You don’t always need to make chocolate creations from molds even if this is the conventional way of doing it. The other option is to dip it in with other things like cookies or fruits so you have your own chocolate fondue as part of your dessert.
When you buy chocolate from the craft store, these are usually sold in blocks which is ready to be transformed into different shapes. To make that happen, you have to melt it.
Melting is not the same thing as tempering so never confuse the two. However, melting is part of the tempering process which can be done using a microwave or a hot water bath.
The nice thing about using a microwave to melt chocolate is that you get the results you want fast with little or no effort at all and mess. Naturally, before you put the chocolate in the microwave, you should put this in a microwave safe container that remains cool or only slightly warm after several minutes.
The ideal setting on the microwave should be at least 50% low power. This prevents scorching or burning.
How long should you put these in on the microwave depends on how much you will be using. A good basis will be 1 minute for every ounce of chocolate so put this first on a weighing scale.
If by accident you overheated the chocolate, don’t panic. Pour this into a cool bowl and add chunks of unmelted chocolate and stir continuously.
If you prefer to use a double boiler, start by filling the sauce pan with hot water from the tap and then put the chocolate over into another bowl. Since the water is just warming up in the bottom, you should only put 1/3 of the chocolate and let it melt first before putting the rest in.
You must stir the bowl frequently so all the chocolate has melted. When this is done, this is the time you pour this into the mold.
Whichever you decide to choose, remember these tips.
• First, chop the chocolates into small pieces because it melts quicker.
• Never let chocolate get into contact with water because it will make the block of chocolate unworkable.
• When melting the chocolate, do this in low heat or temperature so you prevent it from overheating.
• To prevent bubbles, stir the chocolate frequently using a rubber spatula but only when the outer edges begin to melt.
• You have to remember that chocolate retains it shape when melted so again, you have to stir it constantly so there won’t be any problems getting some using a spoon and then pouring this into the mold.
You can also melt chocolate with other liquids aside from water. You can use cream, milk, cream and wine. But most people use water because it is faster and more convenient. But if you were to try other liquids, make sure that you use at least 1 tablespoon of liquid for very 2 ounces of water. This will prevent the chocolate from binding together and becoming lumpy. But if you are using dark chocolate, you may have to add more than 1 tablespoon per ounce.
Melting the chocolate is key in making your final product when you pour this into a mold. It does not matter whether you choose to use a microwave or a double boiler because you will be doing the same thing in the end which is to freeze it and then pack it up to give it as a gift or serve it as part of your dessert.
This website uses cookies that are necessary to its functioning and required to achieve the purposes illustrated in the privacy policy. By accepting this OR scrolling this page OR continuing to browse, you agree to our Privacy Policy